TSKgel® G3000PWXL-CP HPLC Column
SUPELCO/821873 - phase hydroxylated methacrylate, L × I.D. 30 cm × 7.8 mm, 7 μm particle size
Synonym: TSKgel® Size Exclusion (PW-Type) HPLC Column
Product Type: Equipment/Book
| agency | suitable for USP L37 |
| suitable for USP L38 | |
| suitable for USP L39 | |
| L × I.D. | 30 cm × 7.8 mm |
| manufacturer/tradename | Tosoh 21873 |
| material | stainless steel hardware |
| matrix | polymer particle platform |
| matrix active group | hydroxylated methacrylate phase |
| operating pH | 2-12 |
| parameter | ≤0.5 M salt concentration |
| ≤20% organic solvent | |
| 1 mL/min flow rate | |
| 55 bar max. pressure | |
| 60 °C temperature | |
| particle size | 7 μm |
| pore size | 200 Å pore diameter |
| product line | TSKgel® |
| separation technique | size exclusion (SEC) |
| technique(s) | HPLC: suitable |
| Application: | Exclusion limit (Da): 100,000 Separation range (Da) (PEO,PEG): 200~50,000 |
| General description: | TSKgel PWXL-CP columns were specifically developed for the analysis of water-soluble cationic polymers. Composed of polymethacrylate beads, cationic groups are introduced on the surface of the TSKgel PWXL-CP packing material to prevent adsorption of cationic polymers and allow elution under low salt conditions. These columns show high theoretical plate numbers, linear calibration curves and high durability because the base resin is the same as that used in the TSKgel PWXL series columns. Three columns are available within the TSKgel PWXL-CP series, each with a different particle size, separation range and exclusion limit, allowing polymers within a wide molecular mass range to be separated and characterized. |
| Legal Information: | TSKgel is a registered trademark of Tosoh Corporation |
| Physical form: | Shipped in water. |
| Recommended products: | Discover LiChropur reagents ideal for HPLC  or LC-MS analysis |
| UNSPSC | 41115711 |