Advanced Search

aldrich Brand

Displaying 38651-38700 of 68672 results.
Sigma Cat.No.Description
GF39719627Copper - O.F.H.C.
rod, 100mm, diameter 76mm, as drawn, 99.95+%
GF39720641Samarium
powder, max. particle size 500 micron, weight 50 g, purity 99.9%
GF39723239Vanadium
wire reel, 0.5m, diameter 0.1mm, as drawn, 99.8%
GF39731485Niobium
foil, thickness 0.125 mm, size 100 × 100 mm, purity 99.9%
GF39735771Invar® - controlled expansion alloy
foil, Fe 64%/Ni 36%, thickness 0.18 mm, length 5 m, temper hard
GF39742577Nickel
rod, 200mm, diameter 20.0mm, 99%
GF39745143Nickel/Chromium
rod, Ni 80%/Cr 20%, 6.0 mm diameter, length 200 mm, temper annealed
GF39745648Polycarbonate
(PC), rod, diam. 100 mm, L 50 mm, condition machining feedstock
GF39747224Nickel
wire reel, 50m, diameter 2.0mm, hard, 99.98%
GF39747640Copper - O.F.H.C.
foil, 100x100mm, thickness, 0.5mm, half hard, flattened, polished on both sides, 99.95+%
GF39748584Havar® - high-strength non-magnetic alloy, Co42.5Cr20Ni13FeWMoMn
foil, 6mm disks, 0.035mm thickness, as rolled
GF39751948T2 - thermocouple alloy, Ni95(Al+Mn+Si)5
insulated wire, 20m length, 0.025mm conductor diameter, 0.002mm insulation thickness, polyester insulation
GF39754660Iron
foil, 25x25mm, thickness 0.25mm, as rolled, 99.99+%
GF39767822Constantan - resistance alloy, Cu55Ni45
foil, 0.5m coil, 0.02mm thickness, as rolled
GF39770646Silver
foil, 15mm disks, thickness 0.007mm, 99.97%
GF39773076Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3
foil, 2m coil, 0.5mm thickness, annealed
GF39774325Molybdenum
rod, 500mm, diameter 5.0mm, centerless ground, 99.9%
GF39774617Cobalt
microfoil, disks, 10mm, thinness 0.5μm, specific density 434μg/cm2, permanent mylar 3.5μm support, 99.9%
GF39779364Tinned copper
wire, 0.25 mm diameter, length 1000 m, temper annealed
GF39783235Zinc
wire reel, 100m, diameter 2.0mm, extruded, 99.9%
GF39784416Copper
foil, thickness 0.1 mm, length 5 m, coil width 4.8 mm
GF39788454Aluminum-magnesium alloy, Al97Mg3
foil, 5m coil, 0.1mm thickness, as rolled
GF39795508Platinum
wire reel, 0.5m, diameter 0.5mm, annealed, may be used as one component of a thermocouple, 99.99%
GF39797195Titanium
foil, thickness 0.007 mm, size 50 × 50 mm, purity 99.6+%
GF39812137Indium
foil, 8mm disks, thickness 0.125mm, as rolled, 100%
GF39813419Bismuth
foil, 50x50mm, thickness 0.25mm, 100%
GF39819280Polyethylene - Low Density
(LDPE), film, thickness 0.1 mm, L 10 m, condition additive free polymer
GF39830227Copper - O.F.H.C.
foil, 4mm disks, thickness 0.125mm, hard, 99.95+%
GF39838203Zinc
wire reel, 5m, diameter 2.0mm, extruded, 99.9%
GF39839844Nickel
foil, light tested, 300x300mm, thickness 0.05mm, annealed, 99%
GF39849935Cadmium
wire reel, 0.2m, diameter 2.0mm, hard, 99.99+%
GF39851365Silver
foil, 50x50mm, thickness 1.0mm, as rolled, 99.99+%
GF39852614Iron-Chromium-Molybdenum alloy, Fe90Cr9Mo1
foil, 10mm disks, 0.005mm thickness, as rolled
GF39859048Nickel/Iron/Molybdenum
wire, Ni 80%/Fe15.5%/Mo 4.5, 1.0 mm diameter, length 1 m, temper as drawn
GF39861401Copper
foil, thickness 0.001 mm, size 25 × 25 mm, purity 99.97%
GF39868060Iron/boron/silicon
foil, Fe 78%/B 13%/Si 9%, thickness 0.025 mm, length 10 m, coil width 50 mm
GF39869779Inconel® alloy 600 - heat resisting alloy, Ni72Cr16Fe8
foil, 8mm disks, 0.025mm thickness, annealed
GF39870816Polyethylene Terephthalate
(polyester, PET, PETP), laminate, thickness 0.1 mm, L 3 m, polymer thickness 0.05mm
GF39871558Nickel
foil, thickness 1.6 mm, size 50 × 50 mm, purity 99%
GF39871895Molybdenum
foil, 0.5m coil, thickness 0.05mm, annealed, 99.9%
GF39873101Silicon nitride - reaction bonded
rod, 10.0 mm diameter, length 150 mm
GF39873369Carbon - Vitreous
foam, 150x150mm, thickness 3.2mm, bulk density 0.05g/cm3, porosity 96.5%
GF39873392Platinum-iridium alloy, Pt90Ir10
1m insulated wire, 0.05mm conductor diameter, 0.009mm insulation thickness, ptfe (polytetrafluoroethylene) insulation, 99.999%
GF39881830Tantalum
foil, not light tested, 50x50mm, thickness 0.0075mm, 99.9%
GF39882976Silver
tube, outside diameter 12.7 mm, length 200 mm, wall thickness 0.5 mm
GF39884530Quartz - fused
tube, outside diameter 25 mm, length 450 mm, wall thickness 1.5 mm
GF39888286Zirconium
crucible, cylindrical, length 1 pcs, outside diameter 83mm
GF39891088Inconel® X750 - heat resisting alloy, Ni74Cr15Fe7TiAlNb
foil, 1m coil, 0.25mm thickness, annealed
GF39895273Cobalt
foil, 15mm disks, thickness 0.125mm, as rolled, 99.99+%
GF39902621Polycarbonate
(PC), film, thickness 0.25 mm, L 1 m, translucent white 82728

Returns/Order support

Please fill out the form below if you want to request order support from Krackeler Scientific.


Quick Order

* Required


New Year Price Updates

We are currently working diligently to update our website pricing information for the New Year. If you place an order, you will be acknowledged with any corrected pricing. If you'd like the most current information sooner, please don't hesitate to drop us an email or give us a call and we'd be happy to assist. Thank you for your patience while we are updating.

800-334-7725
office@krackeler.com


Play Video

To Request a Quote

  1. Search or Browse for items and add to them to your Shopping Cart.
  2. Click the "Request Quote" button at the bottom of the Shopping Cart page.
  3. Fill out required fields.
  4. Optionally you can convert to standard checkout mode by choosing a payment type.
  5. Click "Request Quote" at the bottom of the page.

You will be contacted with a quote.

To Order From a Quote

  1. Register and login to the website.
  2. Receive a quote from your sales representative or customer service.
  3. Have your copy of the quote in hand.
  4. Visit our quote module to search for your quote.
Back to Top