Advanced Search

aldrich Brand

Displaying 38451-38500 of 66743 results.
Sigma Cat.No.Description
GF43054130Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3
foil, 25mm disks, 0.5mm thickness, annealed
GF43061352Stainless Steel - AISI 316L alloy, FeCr18Ni10Mo3
foil, 50 x 50mm, 0.9mm thickness, annealed, mirror polished on both sides
GF43061510Polymethylmethacrylate
(PMMA, ACRYLIC), sheet, thickness 1 mm, size 100 × 100 mm, clear
GF43076202Copper-beryllium alloy, Cu98Be2
foil, 6mm disks, 0.125mm thickness, half hard
GF43081174Palladium
foil, not light tested, 100x100mm, thickness 0.0125mm, 99.95%
GF43085314Tantalum
tube, 1000mm, outside diameter 3.1mm, inside diameter 2.6mm, wall thickness 0.25mm, as drawn, 99.9%
GF43092008Polytetrafluoroethylene
(PTFE), rod, diam. 50 mm, L 200 mm
GF43107094Aluminum
foil, thickness 0.050 mm, length 10 m, purity 99%
GF43107678Boron nitride
rod, 12.7 mm diameter, length 200 mm, condition hot-pressed
GF43109917Inconel® alloy 718 - heat resisting alloy, Ni53Fe19Cr19NbMoTi
rod, 200mm x 6.35mm diameter, annealed
GF43110212Aluminum-magnesium-silicon alloy, Al98Mg1Si0.6
5m wire, 0.125mm diameter, as drawn
GF43124228Molybdenum
foil, 100x100mm, thickness 0.15mm, annealed, 99.9%
GF43125375Tin
foil, 15mm disks, thickness 0.02mm, 99.75%
GF43134690Aluminum
foil, thickness 0.50 mm, size 300 × 300 mm, high purity 99.999%
GF43134702Polyetheretherketone
(PEEK), film, thickness 0.5 mm, size 150 × 150 mm, gray
GF43135871Polyethylene Terephthalate
(polyester, PET, PETP), film, thickness 0.038 mm, L 1 m, clear clear
GF43139538Gold
insulated wire, 5m, conductor diameter 0.025mm, insulation thickness 0.005mm, polyester insulation, 99.99%
GF43140686Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3
foil, 150 x 150mm, 0.075mm thickness, annealed, light tight (lt)
GF43142969Tungsten
foil, light tested, 25x25mm, thickness 0.025mm, as rolled, 99.95%
GF43143072Tantalum
foil, light tested, 50x50mm, thickness 0.02mm, 99.9%
GF43144657Magnesium
rod, 7.9 mm diameter, length 100 mm, purity 99.9%
GF43148280Palladium
foil, 0.2m coil, thickness 0.1mm, coil width 2mm, as rolled, 99.95%
GF43148875Cadmium
foil, 6mm disks, thickness 0.015mm, 99.7+%
GF43160138Polyaramid
(polyparaphenylene terephthalamide), fiber, tex number 790, L 10 m, filament diameter 0.012mm
GF43172434Copper
foil, thickness 0.013 mm, 8 mm diameter, purity 99.99+%
GF43173581Polyetherimide
(PEI), sheet, thickness 1.6 mm, size 600 × 600 mm, clear amber
GF43173930Gold
rod, 25mm, diameter 3.0mm, as drawn, 99.95%
GF43174728Aluminum
foil, thickness 0.10 mm, size 300 × 300 mm, purity 99%
GF43177305Stainless Steel - AISI 304 alloy, FeCr18Ni10
foil, 15mm disks, 0.025mm thickness, hard
GF43178339Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti
foil, 100 x 100mm, 0.15mm thickness, annealed
GF43180309Vanadium
foil, thickness 0.008 mm, 6 mm diameter, purity 99.8%
GF43185056Polyphenyleneoxide
(PPO ), (ppo (modified), ppe (modified)), rod, diam. 20 mm, L 500 mm, pale gray
GF43189184Stainless Steel - AISI 304 alloy, FeCr18Ni10
foil, 50 x 50mm, 0.40mm thickness, hard
GF43193022Tungsten
foil, light tested, 25x25mm, thickness 0.0125mm, 99.95%
GF43195507Copper
insulated wire, 2m, conductor diameter 0.45mm, insulation thickness 0.25mm, PTFE (polytetrafluoroethylene) insulation
GF43195822Magnesium
foil, thickness 0.125 mm, size 50 × 50 mm, purity 99.9%
GF43196722Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti
foil, 50 x 50mm, 0.025mm thickness, hard, light tight (lt)
GF43198016Lead
rod, 5.0 mm diameter, length 100 mm, purity 99.95%
GF43204834Iridium
wire reel, 0.5m, diameter 0.5mm, as drawn, 99.9%
GF43204890Copper
mesh, 300x300mm, nominal aperture 0.14mm, thickness 0.25mm, wire diameter 0.115mm, 100x100 wires/inch, open area 30.3%, plain weave mesh
GF43206803Nickel-chromium alloy, Ni80Cr20
20m wire, 0.020mm diameter, as drawn
GF43209390Stainless steel - AISI 316
rod, Fe/Cr18%/Ni 10%/Mo 3%, 10.0 mm diameter, length 1000 mm, temper as drawn
GF43220191Silver
insulated wire, 50m, conductor diameter 0.125mm, insulation thickness 0.0125mm, polyimide insulation, 99.9%
GF43223543Constantan - resistance alloy, Cu55Ni45
foil, 100 x 100mm, 0.01mm thickness, as rolled, light tight (lt)
GF43225860Alumina
Bolt, size m6 x 10 mm, length 10 pcs, head style hexagonal
GF43234848Tungsten
wire reel, 100m, diameter 0.38mm, clean, 99.95%
GF43235096Chromium
microfoil, disks, 25mm, thinness 0.25μm, specific density 178.7μg/cm2, permanent mylar 3.5μm support, 99.99+%
GF43243400Platinum/Iridium
wire, Pt 70%/Ir 30%, 0.05 mm diameter, length 1 m, temper as drawn
GF43244164Polypropylene
(PP), film, thickness 0.04 mm, L 5 m, condition biaxially oriented
GF43244276Indium-tin alloy, In50Sn50
foil, 100 x 100mm, 0.25mm thickness

Returns/Order support

Please fill out the form below if you want to request order support from Krackeler Scientific.


Quick Order

* Required


New Year Price Updates

We are currently working diligently to update our website pricing information for the New Year. If you place an order, you will be acknowledged with any corrected pricing. If you'd like the most current information sooner, please don't hesitate to drop us an email or give us a call and we'd be happy to assist. Thank you for your patience while we are updating.

800-334-7725
office@krackeler.com


Play Video

To Request a Quote

  1. Search or Browse for items and add to them to your Shopping Cart.
  2. Click the "Request Quote" button at the bottom of the Shopping Cart page.
  3. Fill out required fields.
  4. Optionally you can convert to standard checkout mode by choosing a payment type.
  5. Click "Request Quote" at the bottom of the page.

You will be contacted with a quote.

To Order From a Quote

  1. Register and login to the website.
  2. Receive a quote from your sales representative or customer service.
  3. Have your copy of the quote in hand.
  4. Visit our quote module to search for your quote.
Back to Top